Samsung NX 1 User Manual page 184

Setting
Camera settings menu >
Item Description
Set to require a PIN when connecting the camera and a
smart phone.
PIN: Enter a PIN before connecting.
None*: Allow a connection without requiring a PIN.
Connections will automatically be made without
Wi-Fi Privacy
requiring a PIN when using the NFC function.
lock
PINs are automatically generated and renewed only
when you reset the camera settings or update the
firmware.
If you have previously connected your camera to a
smart phone via a PIN, they will connect automatically.
Set a frequency for using the camera as an AP for the Quick
Transfer, MobileLink, or Remote Viewfinder features.
(2.4 GHz*, 5 GHz)
Dual-band
If you use the camera in a country other than the one
Mobile AP
where it was purchased, the 5 GHz Wi-Fi feature may not
function properly, due to differences in radio frequencies.
In this case, use the 2.4 GHz Wi-Fi feature instead.
* Default
Item Description
Sensor
Cleaning
Set the priority of using and charging the internal battery
(in the camera) and external battery (in the vertical grip)
when using a vertical grip. This function is supported only
when the vertical grip is attached.
Battery
Selection
Sensor Cleaning: Remove dust from the sensor.
Start-Up Action: When on, the camera performs sensor
cleaning each time you turn it on. (Off*, On)
Shut down Action: When on, the camera performs
sensor cleaning each time you turn it off. (Off*, On)
As this product uses interchangeable lenses, the sensor
can get dust on it when you change lenses. This can lead
to dust particles appearing in the photos you capture. We
recommend that you do not change lenses when you are
in a particularly dusty area. Also, make sure to attach the
lens cap to the lens when not using it.
Auto*: Use the external battery (in the vertical grip) first
and charge the internal battery (in the camera) first.
Internal: Use and charge the internal battery (in the
camera) first. Use the external battery (in the vertical grip)
after the internal battery (in the camera) is discharged.
External: Use and charge the external battery (in
the vertical grip) first. Use the internal battery (in the
camera) after the external battery (in the vertical grip) is
discharged.
* Default
183