Table of Contents
Advertisement
Accessories
My Camera >
Connecting the external flash
1
Remove the hot-shoe cover from the camera.
2
Mount the flash by sliding it into the hot-shoe.
3
Rotate the hot-shoe fastening dial as shown in the illustration
to lock the flash into place.
4
Slide the power switch towards ON to turn on the flash.
You can capture a photo with a flash that is not fully charged, but it is
recommended to use a fully charged flash.
The available options may differ depending on the shooting mode.
When you use Red-eye correction, there is an interval between two bursts of
the flash. Do not move until the flash fires a second time.
For more details about optional flashes, refer to the user manual for the flash.
Use only Samsung-approved flashes. Using incompatible flashes may damage
your camera.
64
Advertisement
Table of Contents
