Interval Capture - Samsung NX 1 User Manual

Hide thumbs Also See for NX 1:
Table of Contents

Advertisement

Shooting Functions
Shooting Functions
Shooting Functions

Interval Capture

Set the shooting interval, the number of shots, and shooting start time.
Use this function to capture photos at regular intervals during an event,
such as a lunar eclipse or a sunrise.
In Shooting mode, press [m]
set a shooting interval, the number of shots, and shooting start
To capture an
time
Start Interval Capture
interval shot,
the time you set. (If you did not set a shooting start time, press
[Shutter] to capture the photo.)
To save interval shots as a video, select Time Lapse
records a UHD video up to 60 seconds long at a rate of 10 fps. When using the
Time Lapse function, you can set the count to less than 600 shots.
Touch
to pause while capturing photos.
Touch
to resume.
Touch
or press [m] to stop capturing.
Use a shutter release cable with a tripod to minimize camera movement
when capturing interval shots.
Connect the power cable if the shooting interval is long or the number of
shots to be taken is high.
If the shooting interval is set to between one minute and 10 minutes, the
camera will enter Display save mode after it starts to capture a photo. If a
shooting interval exceeds 10 minutes, the camera will enter Power save mode
and turn on and capture a photo automatically at the next interval. Press
[Shutter] to cancel Power save mode.
If the battery or memory card is removed while capturing photos, shooting
will stop. Before removing the battery or memory card, interval shooting
must be paused and the camera must be turned off.
b
Interval Capture
wait for shooting to begin at
On. The camera
111
111

Advertisement

Table of Contents
loading

Table of Contents