Table of Contents
Advertisement
Drive (shooting method)
Shooting Functions >
Depth Bracketing
When you press [Shutter], the camera captures 3 consecutive photos,
each with a different depth of field by adjusting the aperture value. Use
a tripod to prevent blurry photos as the camera captures three photos
continuously. You can adjust the settings in the Bracket Settings menu.
To set the shooting
Rotate the drive dial to L, and then press [m]
method,
Drive Settings
This feature is available only in Program or Aperture priority mode.
Bracketing settings
You can set up the options for each bracket function.
In Shooting mode, press [m]
To set a bracketing
Bracket
scroll to an option, and then press [e] (right)
option,
up the options for each bracketing.
b
Bracket
Depth Bracket.
b
Drive Settings
Option
AE Bracket
WB Bracket
P Wiz Bracket
Depth Bracket
set
Description
Set the exposure interval. (-/+ 0.3 EV*, -/+ 0.7 EV,
-/+ 1.0 EV, -/+ 1.3 EV, -/+ 1.7 EV, -/+ 2.0 EV,
-/+ 2.3 EV, -/+ 2.7 EV, -/+ 3.0 EV)
Adjust the White Balance interval range of the
3 bracketed photos. (AB-/+1, AB-/+2, AB-/+3*,
MG-/+1, MG-/+2, MG-/+3)
For example, AB-/+3 adjusts the Amber value plus
or minus three steps. MG-/+3 adjusts the Magenta
value the same amount.
Select the 3 Picture Wizard settings the camera will
use to capture the 3 bracketed photos.
Set the depth interval. Use command dials 1 or 2 or
the navigation button to select an option. You can
also drag the slider or touch the arrows to select an
option. (-/+ 0.3 EV, -/+ 0.7 EV, -/+ 1.0 EV*,
-/+ 1.3 EV, -/+ 1.7 EV, -/+ 2.0 EV, -/+ 2.3 EV,
-/+ 2.7 EV, -/+ 3.0 EV)
* Default
110
Advertisement
Table of Contents
