Table of Contents
Advertisement
Charging the battery and turning your camera on
Charging the battery
Before using the camera for the first time, you must charge the
battery. When connecting the USB cable to the camera, insert
the smaller connector into the camera and the other connector
into the power adapter.
Status lamp
Red light on: Charging
•
Red light off: Fully charged
•
•
Red light blinking: Error
Use only the AC adapter and USB cable supplied with your camera. If you
use another AC adapter (such as SAC-48), the camera battery may not
charge or work properly.
Turning on your camera
Press [POWER] to turn your camera on or off.
• The initial setup screen appears when you turn on the camera
for the first time. (p. 18)
Turning on your camera in Playback mode
Press [
]. The camera turns on and accesses Playback mode
immediately.
If you turn on your camera by pressing and holding [
blinks, the camera does not emit any sounds.
17
Basic functions
] until the status lamp
Advertisement
Table of Contents
