Specifications And Options; Specifications - Icom IC-M506 Instruction Manual

13

SPECIFICATIONS AND OPTIONS

Specifications

■
D General
• Frequency coverage:
• Mode:
• Channel spacing:
• Operating temp. range:
• Current drain (at 13.8 V):
• Power supply requirement:
• Frequency tolerance:
• Antenna impedance:
• Dimensions:
(Projections not included)
• Weight (approximately):
All stated specifications are subject to change without notice or obligation.
109
Tx 156.025–157.425 MHz
Rx 156.050–163.275 MHz
CH70 156.525 MHz
FM (16K0G3E),
DSC (16K0G2B)
25 kHz
–20°C to +60°C (–4ºF to +140ºF)
TX high 5.5 A maximum
Max. audio 5.0 A maximum
(With EXT SP)
Max. audio 1.5 A maximum
(With INT SP)
13.8 V DC ±15%
(negative ground)
±10 ppm (–20°C to +60°C;
–4ºF to +140ºF)
50 ˘ nominal
178.9 (W) × 113.9 (H) ×
113.8 (D) mm
7 (W) × 4.5 (H) × 4.5 (D) inches
1.4 kg; 3.1 lb
D Transmitter
• Output power:
• Modulation system:
• Max. frequency deviation:
• Spurious emissions:
D Receiver
• Receive system:
• Sensitivity (12 dB SINAD):
• Squelch sensitivity:
• Intermodulation rejection ratio: More than 75 dB
• Spurious response rejection ratio: More than 75 dB
• Adjacent channel selectivity:
• Audio output power:
25 W/1 W
Variable reactance frequency
modulation
±5.0 kHz
Less than –70 dBc (high)
Less than –56 dBc (low)
Double conversion
superheterodyne
–13 dBµ (typical)
–5 dBµ emf (typical)
(CH70/DSC) (1% BER)
Less than –7 dBµ
More than 68 dBµ emf
(CH70/DSC) (1% BER)
More than 73 dBµ emf
(CH70/DSC) (1% BER)
More than 75 dB
More than 73 dBµ emf
(CH70/DSC) (1% BER)
More than 15 W at 10% distor-
tion with an external speaker
(4 ˘ load)