Dsc Operation - Icom IC-M506 Instruction Manual

7

DSC OPERATION

After making the individual DSC call, the transponder will
r
display "DSC Transmission COMPLETED."
• Push [CLEAR] to return to the screen displayed before you en-
tered the voice channel selection screen in step w.
• The transceiver stands by on Channel 70 until an acknowledge-
ment is received.
Transponder's display
Step 2: Transceiver's operation
When the acknowledgement is received, alarm sounds.
t
If the acknowledgement
➥
push [ALARM OFF] to stop the alarm, and then select
the intership channel specified in step w.
• A different intership channel will be selected if the station you
called cannot use the channel.
• To reply, push [PTT] and speak at a normal voice level.
• You can check the MMSI code or the name, if programmed,
of the AIS target on the display.
If the acknowledgement
➥
push [ALARM OFF] to stop the alarm, and then "INDI-
VIDUAL CALL FAILED" is displayed.
73
Transceiver's display
'Able to comply is received,
'
'Unable to comply is received,
'
'Able to comply' is received
'Unable to comply' is received
y After the communication is finished, push [EXIT] to return
to the normal operating mode.
TRANSPONDER
[Y]
[Z]
[CLEAR]
[DSC]