Icom IC-M506 Instruction Manual page 58

7
DSC OPERATION
D Transmitting a Position Report Reply call
Transmit a Position Report Reply call when a Position Report
call is received.
Quick Reply:
q When a Position Report Request is received, alarm sounds
and the screen shown below is displayed.
Push [ALARM OFF] to stop the alarm.
• Even if you do not push [ALARM OFF], the alarm stops after 2
minutes, and then the screen in step w is displayed.
w Push [ACK].
• Push [EXIT] to return to the normal operating mode.
• Push [INFO] to display the Position Report Request call informa-
tion.
49
About Received call information:
• Push [EXIT] to return to the normal operating mode.
• Push [BACK] to return to the previous screen.
• Push [ACK] to go to the next step.
e The Position Report Reply confirmation screen is dis-
played.
Push [CALL] to transmit the reply call.
r While transmitting the reply call, the screen shown below
is displayed, and then returns to the normal operating
mode.