Operation; Default Setting - Icom IC-F50V SERIES Operating Manual

2

OPERATION

I Default setting
The following functions are assigned to each programmable key as
the default. However, the assigned function can be changed by
your dealer. Ask your dealer for details.
[P0]; Call
[P1]; Digital Button : Push to select the call list ID/transmit mes-
[P3]; Moni(Audi)
[ ]/[ ]; CH Down/Up
[P2]/[Red]; Null
2
: Push to transmit a BIIS code when the se-
lected channel is a MSK channel.
sage, or push to display the receive message
record for selection.
: Push this key after the communication to
send a 'clear down' signal during MSK chan-
nel operation.
: While in the standby condition, push to select
the operating channel.
After pushing [Digital] or [TX Code CH Se-
lect], push to select call list or TX code chan-
nel, respectively.
: No function is assigned.