Chapter 2
Installing the SN 5428-2 Storage Router
Figure 2-23 Power Set to Off
Power switch
Plug the power cord into the power receptacle located on the rear panel on the
Step 3
chassis. (See
Figure 2-24 Connecting a Power Cord to the SN 5428-2 Power Connector
Connect the other end of the power cord to the power source for the storage router.
Step 4
OL-4797-01
I
O
set to off
Figure
2-24.)
Cisco SN 5428-2 Storage Router Hardware Installation Guide
Connecting Power
2-29