Cisco SN 5428-2 Hardware Installation Manual page 37

Chapter 2 Installing the SN 5428-2 Storage Router
Align the holes in the rails with mounting holes in the rack. Ensure that the rails
Step 6
are level from front to rear and side to side. (See
Attach the front of each rail by screwing one screw through the front top hole of
Step 7
the rail into a corresponding hole in the mounting post. (See
the rear of each rail by screwing two screws through the rear holes of the rail into
the corresponding holes in the mounting post.
Figure 2-6
OL-4797-01
Attaching the Rails to the Rack
Cisco SN 5428-2 Storage Router Hardware Installation Guide
Installing the SN 5428-2 Chassis
Figure 2-6.)
Figure 2-6.) Attach
2-11