Cisco SN 5428-2 Hardware Installation Manual page 45

Chapter 2 Installing the SN 5428-2 Storage Router
Figure 2-15 Inserting an Actuator/Button SFP Module
To remove an actuator/button SFP module from a port, perform the following
steps:
Gently press the actuator/button on the front of the SFP module until it clicks and
Step 1
the latch mechanism activates, releasing the SFP module from the port. (See
Figure
Grasp the actuator/button between your thumb and index finger and carefully pull
Step 2
the SFP module from the port.
OL-4797-01
2-16.)
Cisco SN 5428-2 Storage Router Hardware Installation Guide
Installing SFP Modules
2-19