Cisco SN 5428-2 Hardware Installation Manual page 42

Installing SFP Modules
Figure 2-10 LC Connector and Fiber-Optic SFP Module
Protect your fiber-optic SFP modules by inserting clean dust covers into the SFPs
Caution
after the cables are extracted from them. Be sure to clean the optic surfaces of the
fiber cables before you plug them back into the optical bores of another SFP
module. Avoid getting dust and other contaminants into the optical bores of your
SFP modules. The optics will not work correctly when obstructed with dust.
The SFP modules have three different types of latching devices used to secure and
detach the SFP module from a port. The three types of SFP modules are described
in the following sections:
•
•
•
Cisco SN 5428-2 Storage Router Hardware Installation Guide
2-16
LC plug
SFP module
Mylar Tab SFP Modules, page 2-17
Actuator/Button SFP Modules, page 2-18
Bale Clasp SFP Modules, page 2-21
Chapter 2 Installing the SN 5428-2 Storage Router
OL-4797-01