Table of Contents
Advertisement
VFO SCAN
VFO Scan monitors all frequencies tunable on the band,
using the current frequency step size.
1 s
9
1 Select the desired band.
2 Press [VFO] (1 s).
• Scan starts at the frequency currently displayed.
• The 1 MHz decimal blinks while scanning is in progress.
• To reverse the scan direction, turn the Tuning control
clockwise (upward scan) or counterclockwise
(downward scan). You can also press Mic [UP]/ [DWN].
3 To exit VFO Scan, press [VFO] again.
48
MEMORY SCAN
Use Memory Scan to monitor all memory channels
programmed with frequency data.
1 s
1 Select band A or B.
2 Press [MR] (1 s).
• Scan starts with the channel last recalled.
• The 1 MHz decimal blinks while scanning is in progress.
• To reverse the scan direction, turn the Tuning control
clockwise (upward scan) or counterclockwise
(downward scan). You can also press Mic [UP]/ [DWN].
3 To exit Memory Scan, press [MR] again.
Note:
◆
At least 2 memory channels must contain data and must not be
locked out in order for Scan to function.
◆
The L0 to L9 and U0 to U9 memory channels are not scanned.
◆
You can also start Memory Scan when in Channel Display mode.
While Scan is being interrupted, the channel number blinks.
Advertisement
Table of Contents
