Lexmark MS312 User Manual page 164

Troubleshooting
Incorrect paper size, open [paper source] [34]
Note: The paper source can be a tray or a feeder.
Try one or more of the following:
• Load the correct size of paper in the paper source.
•
From the control panel, press
•
Check the length and width guides of the paper source and make sure the paper is loaded properly.
• Make sure the correct paper size and type are specified in the Printing Preferences or in the Print dialog.
•
Make sure the paper size and type are specified in the Paper menu on the control panel.
•
Make sure that the paper size is correctly set. For example, if Multipurpose Feeder Size is set to Universal, then
make sure the paper is large enough for the data being printed.
•
Cancel the print job.
Insufficient memory to support Resource Save feature [35]
Try one or more of the following:
• From the printer control panel, press
• Install additional printer memory.
Insufficient memory to collate job [37]
Try one or more of the following:
• From the printer control panel, press
of the print job.
•
Cancel the current print job.
Insufficient memory for Flash Memory Defragment operation [37]
Try one or more of the following:
• From the printer control panel, press
•
Delete fonts, macros, and other data in the printer memory. From the printer control panel, navigate to:
> Settings >
• Install additional printer memory.
Insufficient memory, some Held Jobs were deleted [37]
From the printer control panel, press
to clear the message and print using a different paper source.
to disable Resource Save, clear the message, and continue printing.
to print the portion of the job already stored and begin collating the rest
to stop the defragmentation and continue printing.
> Settings > >Print Settings >
to clear the message.
> Utilities Menu > > Format Flash >
164
> Yes >