Specifications - Kenwood KRF-A4020 Instruction Manual

Specifications

[ AUDIO section ]
20
Rated power output during STEREO operation
(DIN) 1 kHz, 0.7 % at 4
(IEC) 63 kHz ~ 12.5 kHz, 0.5 % at 4
Total harmonic distortion ....... 0.02 % (1 kHz, 50 W, 4
Signal to noise ratio
PHONO (MM) .......................................... 75 dB (IHF'66)
CD ............................................................. 92 dB (IHF'66)
Input sensitivity / impedance
PHONO (MM) ........................................ 2.5 mV / 27 k
CD .......................................................... 200 mV / 47 k
Output level / impedance
TAPE REC ............................................ 200 mV / 2.2 k
PRE OUT (SUBWOOFER) ........................... 2 V / 2.2 k
Tone control
BASS ................................................... ±9 dB (at 100 Hz)
TREBLE ............................................... ±9 dB (at 10 kHz)
[ FM tuner section ]
Tuning frequency range
U.K. and Europe ........................ 87.5 MHz ~ 108.0 MHz
Russia ............... 87.5 MHz ~ 108.0 MHz (10 kHz STEP)
Usable sensitivity (DIN, 75
MONO ..... 1.2 µV / 13.2 dBf (40 kHz DEV., S/N 26 dB)
STEREO .... 45 µV / 44.2 dBf (46 kHz DEV., S/N 46 dB)
Total harmonic distortion (DIN, 1 kHz)
MONO .......................................... 0.2% (65.2 dBf input)
STEREO ........................................ 0.8% (65.2 dBf input)
Signal to noise ratio (DIN weighted, 1 kHz)
U.K. and Europe
MONO .... 65 dB (40 kHz DEV., S/N 26 dB, 65.2 dBf input)
STEREO . 58 dB (46 kHz DEV., S/N 46 dB, 65.2 dBf input)
Russia
MONO ... 63 dB (40 kHz DEV., S/N 26 dB, 65.2 dBf input)
STEREO . 58 dB (46 kHz DEV., S/N 46 dB, 65.2 dBf input)
Stereo separation (DIN, 1 kHz) ................................ 36 dB
Selectivity (DIN, ±300 kHz) ....................................... 64 dB
Frequency response (30 Hz ~ 15kHz) ....... +0.5 dB ~ –3.0 dB
Notes:
1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed
without notice.
2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
105 W + 105 W
100 W + 100 W
55 dB (DIN 50mW output)
56 dB (DIN 50mW output)
65.0 MHz ~ 74.0 MHz (50 kHz STEP)
)
Caution : Read this page carefully to ensure safe operation.
[ AM tuner section ]
Tuning frequency range ................... 531 kHz ~ 1,602 kHz
Usable sensitivity (30% mod., S/N 20 dB)
......................................................... 16 µV / (600 µV/m)
)
Signal to noise ratio (30% mod., 1 mV input) ........ 50 dB
[ GENEAL ]
Power consumption ................................................. 280 W
AC outlet
SWITCHED .................................... 2 (total 150 W max.)
Dimensions ........................................................ W: 440mm
Weight (Net) ............................................................... 8.0 kg
For your records
Record the serial number, found on the back of the unit, in
the spaces designated on the warranty card, and in the
space provided below. Refer to the model and serial
numbers whenever you call upon your dealer for informa-
tion or service on this product.
Model
KRF-A4020 (En/E2T)
H : 144mm
D : 390mm
Serial Number