Specifications - Kenwood KMM- BT508DAB Instruction Manual

Troubleshooting
Symptom
No response from Alexa after
the voice input.
Wrong response from Alexa.
"DISCONNECTED"
Not able to connect or • Be sure the audio device is connected via Bluetooth.
reconnect to Alexa mobile
application.
• Perform the one-time setup process again. See "Setup for
• Turn off, then turn on the unit and try to connect again.
• For iOS device, make sure ALEXA source or iPod BT source
Not able to exit from
"TALKING" screen after
ending the call.
Not able to go to • Disconnect and connect the Bluetooth connection again.
"LISTENING" screen after
activated Alexa. • Disconnect and connect the Alexa connection again.
• Turn off the unit for about 10 seconds, then turn on the
40
ENGLISH
Remedy
Amazon cloud was unable to analyze the voice input.
Alexa misunderstood what was said or did not catch
the entire request or sentence spoken. Please try again.
(Page 22)
Be sure to connect your smartphone to the unit via
Bluetooth. (Page 16)
Select the audio device from [AUDIO SELECT] in
[BT MODE]. (Page 19)
the first time" on page 21.
is selected.
It may take some time for the unit to exit the "TALKING"
screen. Press number button 6 to return to the previous
source control screen.
(Page 16)
(Page 21)
unit and try again.

Specifications

DAB Frequency Range
Sensitivity
Signal-to-Noise Ratio
Antenna Connector Type
Antenna Output Voltage
Antenna Maximum Current
FM Frequency Range
Usable Sensitivity
(S/N = 30 dB)
Quieting Sensitivity
(DIN S/N = 46 dB)
Frequency Response
(±3.0 dB)
Signal-to-Noise Ratio (MONO) 68.0 dB
Stereo Separation (1 kHz)
MW Frequency Range
(AM)
Usable Sensitivity
(S/N = 20 dB)
LW Frequency Range
Usable Sensitivity
(S/N = 20 dB)
Band III:
174.928 MHz — 239.200 MHz
–100 dBm
90 dB
SMB
12 V DC
< 100 mA
87.5 MHz — 108.0 MHz (50 kHz step)
6.2 dBf (0.56 μV/75 Ω)
15.2 dBf (1.58 μV/75 Ω)
30 Hz — 15 kHz
40 dB
531 kHz — 1 611 kHz (9 kHz step)
28.5 μV
153 kHz — 279 kHz (9 kHz step)
45 μV