AUDIO RECEIVER KRF-A4020 INSTRUCTION MANUAL About the supplied remote control (RC-R0708) . . . Compared to standard remote controls, the remote control supplied with this receiver has several operation modes. These modes enable the remote control to control other audio components.
However, since this receiver works with all of your audio components, connecting the system can be fairly complex. Operations Shows you how to operate the various functions available from the receiver. Other Shows you additional information such as “In case of diffi- culty” (troubleshooting) and “Specifications.” KRF-A4020 (En/E2T)
Remote controllable audio function By connecting KENWOOD source components such as a cassette deck and CD player through system control connec- tion, the basic operations of these components can be con- trolled from the remote control unit provided with this unit.
Caution : Read this page carefully to ensure safe operation. Connecting audio components SYSTEM CONTROL jacks PLAY IN PLAY IN REC OUT PHONO KRF-A4020 (En/E2T) Shape of AC outlets For U.K. Other countries To AC wall outlet PLAY IN REC OUT PLAY IN MD / TAPE1...
Using speakers with a rated impedance other than that indicated on the rear panel of the receiver could result in malfunctions or damage to the speakers or receiver. Setting up the system KRF-A4020 (En/E2T) 2 Push lever. 4 Return lever. Front Speakers B Left...
2. Do not connect system control cords to any compo- nents other than those specified by KENWOOD. It may cause a malfunction and damage your equipment. 3. Be sure the system control plugs are inserted all the way in to the system control terminals.
& SOUND key Use to adjust the sound quality. * MULTI CONTROL knob Used to make a variety of settings. ( INPUT SELECTOR knob Use to select the input sources. KRF-A4020 (En/E2T) TUNED indicator STEREO TUNED AUTO AUTO indicator TRAIT...
@ MUTE key Use to temporarily mute the sound. # MULTI CONTROL keys Used to make a variety of settings. $ BALANCE key Use to adjust the sound balance. % TAPE2/ MONITOR key Names and functions of parts KRF-A4020 (En/E2T) )key...
3. Placing the remote sensor in direct sunlight, or in direct light from a high frequency fluorescent lamp may cause a malfunction. In such a case, change the location of the system installa- tion to prevent malfunction. Names and functions of parts KRF-A4020 (En/E2T)
• The sound of input source cannot be listened to with TAPE2/MONITOR is ON. KRF-A4020 (En/E2T) : Sound from the speakers connected to the SPEAKERS A terminals on the rear panel. : Sound from the speakers connected to the SPEAKERS B terminals on the rear panel.
The mode for adjusting the volume balance between the left and right. 1 Press the BALANCE key. 2 Use the MULTI CONTROL to adjust the balance. Indicates the balance setting. Indicates the center. L - - t Normal playback KRF-A4020 (En/E2T)
I N P U T TAPE 2/MONI • The adjustment mode is displayed for approximately 8 seconds. • The input level may be adjusted to any one of 2 settings: 0 and -6. (The initial setting is 0.) KRF-A4020 (En/E2T)
Before using a function utilizing the RDS, be sure to a station is perform the RDS Auto Memory operation by referring to received the description in “Presetting RDS stations (RDS AUTO MEMORY)”. KRF-A4020 (En/E2T) STEREO B B C 1 F M TUNED AUTO &...
STEREO TUNED RDS stations.) AUTO • The RDS AUTO MEMORY may take a few minutes to preset stations. Listening to radio broadcasts KRF-A4020 (En/E2T) STEREO A B MUTE A U T O TUNED AUTO STEREO M E M O R Y...
01+02+03+ ... 28+29+30+01+02+03+ Holding down the P.CALL key, lets you skip through the presets, receiving each for 0.5 seconds apiece. Listening to radio broadcasts KRF-A4020 (En/E2T) For ”15“, press ... 0,5 For ”20“, press ... 0,0,) STEREO 9 ) ) )
Be sure to use the RDS AUTO MEMORY function. TRAVEL LEISURE JAZZ COUNTRY NATION M OLDIES FOLK M DOCUMENT Listening to radio broadcasts KRF-A4020 (En/E2T) Blinks STEREO R O C K M TUNED AUTO Blinks for 2 seconds Program type name display Goes out A B MUTE...
Page 17
• The “TI.VOL” indicator stops blinking and remains lit. To cancel Hold down the TA/NEWS key for more than 2 seconds so that the “TI.VOL” indicator goes off. Listening to radio broadcasts KRF-A4020 (En/E2T) STEREO TUNED EON FM T I - 6 6 d B...
• The preset memory was cleared be- cause the power cord had been un- plugged for a long period of time. KRF-A4020 (En/E2T) Remedy • Connect properly referring to “Setting the speakers”. • Adjust the volume to a proper level.
Page 19
• An attempt is made to play a tape which is being recorded in the cassette deck. In case of difficulty KRF-A4020 (En/E2T) Remedy • Replace with new batteries. • Operate the remote control unit within the controllable range.
Frequency response (30 Hz ~ 15kHz) ... +0.5 dB ~ –3.0 dB Notes: 1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. 2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).