Presetting Radio Stations Manually; Receiving Preset Stations; Receiving Preset Stations In Order - Kenwood KRF-A4020 Instruction Manual

Presetting radio stations manually

The RDS auto memory function assigns preset numbers to
RDS stations starting from preset number "01". Therefore,
be sure to execute the RDS auto memory function before
using the following operations to manually store AM stations
and other FM stations, and RDS stations.
"Presetting RDS stations (RDS AUTO MEMORY)".
1
Tune to the station you want to store.
2
Press the MEMORY key while receiving the station.
Proceed to step 3 within 5 seconds.
(If more than 5 seconds elapse, press the MEMORY
key again).
• When storing radio stations manually, it may take a few
seconds before the "MEMO" indicator appears in the
display after pressing the MEMORY key depending on
receiving conditions.
Blinks for 5 seconds Lights for 5 seconds
MEMO
SP. A B
0 1 8 9 ) )
FM
3
Use the MULTI CONTROL to select one of the station
presets (1 – 30).
4
Press the MEMORY key to accept the setting.
• Repeat steps 1, 2, 3 and 4 to store as many stations
as necessary.
• If you store a station at a previously used preset, the old
station will be replaced by the new one.
$
STEREO
TUNED
.
AUTO
MHz
Listening to radio broadcasts

Receiving preset stations

1
Use the input selector (INPUT SELECTOR) to select
the tuner.
2
Using the remote control unit, enter the number of
the preset you want to receive (up to "30").
Press the numeric keys in the following order:
For "15", press .......... 0,5
For "20", press .......... 0,0,)
• If you make a mistake entering a two digit number, press
the 0 key several times to return to the original
display and start again.
SP. A B
1 5 9 ) ) )
FM

Receiving preset stations in order

(P.CALL)
1
Use the input selector (INPUT SELECTOR) to select
the tuner.
2
Use the P.CALL key to select the desired station.
• Each time you press the P.CALL key, another preset
station is received in order.
Pressing the P.CALL (¢) key does the following:
01=02=03= .... 28=29=30=01=02=03=
Pressing the P.CALL (4) key does the following:
01+02+03+ .... 28+29+30+01+02+03+
Holding down the P.CALL key, lets you skip through
the presets, receiving each for 0.5 seconds apiece.
KRF-A4020 (En/E2T)
STEREO
. TUNED
AUTO
MHz
15