EverFocus EHD700A Ultra 720+ User Manual page 11

7. Connect the camera to a DVR or a portable monitor using the Test lead for viewing the
camera view while adjusting camera angles. You can also use the OSD Menu Joystick to
configure camera settings.
a. Adjust camera angles by tilting or rotating the camera.
b. To configure camera settings using the OSD Menu Joystick, connect one end of the
Test lead to the Test-Out connector on the camera module and the other end to the
portable monitor.
8. Adjust the Zoom / Focus using the Zoom / Focus screws. Tighten the Zoom / Focus screws
using the supplied Screwdriver.
EHD700A/730A Ultra 720+ TVL Vandal Dome Camera
 Push the Joystick up / down to select
among menu items.
 Push the Joystick left / right to adjust
the level of the selected item.
 Press the Joystick to enter the submenu
or exit the OSD Setup Menu.
11