Installing The Ink Cartridges (Lec-330); Ink Mode; Filling With Ink For The First Time; Affixing The Cartridge-Slot Labels - Roland LEC-300A Setup Manual

6. Installing the Ink Cartridges (LEC-330)

Ink Mode

In the case of LEC-330, you need to select the ink mode in accordance with the ink type.
? P.47, "Selecting the Ink Mode"
 ECO-UV gloss/gloss mode
This mode uses cyan, magenta, yellow, and black ECO-UV ink cartridges and two gloss ink cartridges.
 ECO-UV white/white mode
This mode uses cyan, magenta, yellow, and black ECO-UV ink cartridges and two white ink cartridges.
 ECO-UV gloss/white mode
This mode uses cyan, magenta, yellow, and black ECO-UV ink cartridges, one gloss ink cartridge and
one white ink cartridge.
 ECO-UVS ink mode
This mode uses cyan, magenta, yellow, and black ECO-UVS ink cartridges and two white ink cartridges.

Filling with Ink for the First Time

When installing ink cartridges for the first time, clean the print heads with the cleaning solution,
and then fill with ink of each color. This operation requires four SOL INK cleaning cartridges.
* For SOL INK cartridges and ink cartridges, be sure to use new ones.
* Never, under any circumstances, use anything other than the specified type of ink or cleaning
fluid.
* You can switch the ink type after filling with ink although there are some restrictions. See
"Switching the Ink Type" in User's Manual for more information.

Affixing the Cartridge-slot Labels

Procedure

Open the ink cartridge cover.
Knob
Hold the knob.
45