Table of Contents
Advertisement
If you want to sign the hob
– on to the Miele@home system, first
prepare the signing on procedure on
the master (display) appliance.
– To sign on to Con@ctivity, you must
first sign the cooker hood on.
Signing on the hob
With the hob switched off, touch the
and sensors at the same time
until the indicator light for the safety
lock flashes.
In the timer display, (programme) and
(status) appear. The programme num‐
ber will be displayed to the left of the
control scales and the set status to the
right.
Touch the number 1 on the rear left
control scale (set to programme 10).
Touch the number 2 on the front
right control scale (set to status 2 =
sign on).
The signing-on procedure starts and
number 2 flashes on the front right con‐
trol scale. The signing-on procedure will
take a few minutes. The number 2 lights
up constantly as soon as the procedure
has been completed successfully.
To save the setting, touch the sen‐
sor until the displays go out.
Finish signing on the cooker hood/
master appliance (see the relevant in‐
structions).
Miele@home / Con@ctivity
Signing off the hob
If you would light to sign off the hob
from Miele@home, first carry out the
signing-off procedure on the display
device.
With the hob turned off, touch the
and sensors at the same time
until the indicator light for the safety
lock flashes.
In the timer display, (programme) and
(status) appear. The programme num‐
ber will be displayed to the left of the
control scales and the set status to the
right.
Touch the number 1 on the rear left
control scale (set to programme 10).
Touch number 1 on the right front
control scale (set Status 1 = signing-
on).
The signing-off procedure starts and
number 1 flashes on the right front of
the control scale. The signing-off pro‐
cedure will take a few minutes. The
number 1 lights up constantly as soon
as the procedure has been completed
successfully.
To save the setting, touch the sen‐
sor until the displays go out.
49
Hide quick links:
Advertisement
Table of Contents
