Table of Contents
Advertisement
Warning and Safety instructions
Miele can only guarantee the safety of the appliance when genu‐
ine original Miele replacement parts are used. Faulty components
must only be replaced by Miele spare parts.
The hob is not intended for use with an external timer switch or a
remote control system.
The hob must be connected to the electricity supply by a qualified
electrician (see "Electrical connection").
If the connection cable is damaged, it must be replaced with a
special connection cable type H 05 VV-F (PVC insulated). See "Elec‐
trical connection".
The hob must be disconnected from the mains electricity supply
during installation, maintenance and repair work. Ensure that power
is not supplied to the appliance until after it has been installed or un‐
til any maintenance or repair work has been carried out.
If the hob is fitted with a communication module, in addition to
disconnecting the hob, this module must also be disconnected from
the mains electricity during installation and maintenance of the hob
as well as while any repair work is being carried out.
Danger of electric shock.
Do not use the hob if it is faulty, or if the ceramic surface is cracked,
chipped or damaged in any way. Switch it off immediately, discon‐
nect it from the mains electricity supply and contact Miele.
If the hob is installed behind a furniture panel (e.g. a door), ensure
that the door is never closed whilst the hob is in use. Heat and mois‐
ture can build up behind a closed furniture panel and cause subse‐
quent damage to the hob, the housing unit and the floor. Do not
close the door until the residual heat indicators have gone out.
8
Hide quick links:
Advertisement
Table of Contents
