Using Both Timer Functions At The Same Time - Miele KM 6388 Operating And Installation Instructions

Using both timer functions at
the same time
The minute minder and automatic
switch-off functions can be used at the
same time.
If you have programmed in one or more
switch-off times, and would like to use
the minute minder as well:
 Touch the  sensor repeatedly until
the indicator lights of the program‐
med cooking zones light up con‐
stantly and  appears in the timer
display.
 Set the time as described above.
If you have set the minute minder and
would like to programme in one or more
switch-off times as well:
 Touch the  sensor repeatedly until
the indicator light for the zone you re‐
quire flashes.
 Set the time as described above.
Shortly after the last entry, the timer
display switches to the function with
the shortest remaining time.
If you want to show the times remaining
which are counting down in the back‐
ground:
 Touch the  sensor repeatedly until
– the indicator light for the cooking
zone you want flashes (automatic
switch-off).
– The timer display (minute minder)
starts flashing.
Starting with the shortest time remain‐
ing which is shown in the display, all
cooking zones which are switched on
and the minute minder are selected
clockwise.
Timer
33