Problem solving guide
Problem
alternating with a
number flashes
in the timer dis‐
play.
46
Cause and remedy
The overheating protection mechanism has been acti‐
vated.
See "Overheating protection".
or
The fan is blocked or defective.
Make sure it has not been blocked by something
like a fork. Remove the cause of the blockage.
If this fault message continues to appear in the
display, contact Miele Service.
and other numbers
There is a fault in the electronic module.
Interrupt the power supply to the hob for approx. 1
minute.
If the problem persists after power has been re‐
stored, please contact Miele.