Signing Off The Hob; Signing On The Hob - Miele KM 6322 Operating And Installation Instructions

With induction

Hide thumbs Also See for KM 6322:

Operating and installation instruction (80 pages)

Operating and installation instructions (80 pages)

Operating and installation instructions (72 pages)

Table Of Contents

Table of Contents

– To sign on to the Miele@home

system, first prepare the signing on

procedure on the master (display)

appliance.

– To sign on to Con@ctivity, you must

first sign the cooker hood on.

Signing on the hob

 With the hob switched off, touch the

 and  sensors at the same time

until the indicator light for the safety

lock flashes.

In the timer display  (programme) and

 (status) will appear. On hobs that

have 3 cooking zones, an additional

display appears at the back left.

 Touch the sensor for selecting the

front left cooking zone and then the

power level 1 number sensor (Set

Programme 10).

 Touch the sensor for selecting the

front right cooking zone and then the

power level 2 number sensor (Set

Status 2 = Sign on).

The signing on process starts and the

number 2 flashes in the cooking zone

display. The signing on process takes a

few minutes. The number 2 will light up

constantly when the process has been

completely successful.

 To save the setting, touch the 

sensor until the displays go out.

 Finish signing on the cooker hood/

master appliance (see the relevant

instructions).

Miele@home / Con@ctivity