Panasonic AJ-HPD2500P Operating Instructions Manual page 25

22.
REW/PREV button
REW button
Press to rewind. Select the speed in setup menu No.
102 (FF. REW MAX).
PREV (SHIFT + REW) button
During playback or while displaying a still picture with
JOG/VAR/SHTL, hold the SHIFT button and press this
button to move to the beginning of the current or
previous clip.
During playback of a recorder in playlist mode, the
beginning of the previous video event is located. The
operation interrupted by this function resumes when
the beginning of a clip is located.
During thumbnail display, hold down the SHIFT button
and press this button to move to the first thumbnail.
23.
PLAY/REVIEW/1 CLIP PLAY button
PLAY button
Press to start playback.
Press this button and the REC button simultaneously to
start recording.
REVIEW (SHIFT + PLAY) button
In playlist mode, hold down the SHIFT button and
press this button to review the event at the cursor
location (starting 3 seconds before the IN point to 1
second beyond the OUT point).
1 CLIP PLAY (SHIFT + PLAY) button
In the thumbnail display or while displaying a still
picture by pressing the SEARCH button in the
thumbnail display, hold down the SHIFT button and
press this button to play back only the clip at the cursor
position or the currently located clip. During playback
only the STOP button is available.
24.
STOP button
When the STOP switch is set to PB mode, press this
button to engage the stop mode to view still pictures.
Use setup menu No. 104 (REF ALARM) to determine
whether or not this button should flash as a warning
alarm when no reference video signal is input.
25.
FF/NEXT button
FF button
Press to fast forward. Select the speed in setup menu
No. 102 (FF. REW MAX).
NEXT (SHIFT + FF) button
During playback or while displaying a still picture with
JOG/VAR/SHTL, press this button to move to the
beginning of the next clip.
During thumbnail display, press this button to move to
the last thumbnail.
26.
REC button
In the stop mode, press this button and the PLAY
button simultaneously to start recording. Press this
button to check EE mode video and audio on the
monitor in the stop mode with the STOP switch set to
PB mode.
Press the STOP button to return to the original video
and audio.
27.
SHIFT button
This button is used in combination with other buttons.
Introduction: Control Reference Guide
25