Reebok Pure+ User Manual page 15

Workout in WATT constant mode:
Note: (This ITEM is not CLASS A
In standby mode, select WATT and press MODE to enter.
The preset watt value 120 is flashing on screen in WATT setting mode, select
UP/DOWN/ENTER to set target value from 10 to 350. Press START button
to start training.
After start, Level is adjusted according to RPM to reach the setting WATT.
▲ : WATT > setting WATT
● : WATT = setting 25%
▼ : WATT < setting 25% – user need to speed up
— : WATT > or < setting WATT 50% (OVER SPEC)---
Console will sound double beep if ▲ or ▼ below target watts
BODY FAT
You may test your BODY FAT
Please follow the steps as below:
1. Press BODY FAT button, and hold the pulse sensors to start body fat testing.
2. The symbol "- - - - - - - - " will display while testing for a period of 8 seconds.
After 8 seconds, you will see the BODY FAT advice in percentage and BMI and
the fat advice in different symbol.
3. If the reading is not displayed see the error messages
below that may be received.
"E-1" - When you see this indication, it means you did not put your thumb
properly on the conductor. Please try again.
"E-4" - When you see this indication, it means the BODY FAT advice is
exceeded the available area which is fixed in the program.
Gymnasium product, WATT only for reference)
25% – user need to slow down
when the computer is in STOP mode.
13