Table of Contents
Advertisement
Mounting Considerations
The display unit can be mounted on a table-
top, a bulkhead or on the overhead. When se-
lecting a mounting location, keep in mind the
following points:
• Select a location where the display unit can
be viewed and operated conveniently and
where the screen can be viewed while fac-
ing towards the bow.
• Locate the equipment away from places
subject to water splash and rain.
• The display unit weighs 13 kg. Be sure the
mounting location is strong enough to sup-
port the weight of the unit under the con-
tinued vibration which is normally
experienced on the ship. If necessary rein-
force the mounting location.
• Leave sufficient space on the sides and rear
of the unit to facilitate maintenance. Also,
leave a foot or so of "service loop" in cables
behind the unit so it can be pulled forward
for servicing or easy removal of connec-
tors.
• A magnetic compass will be affected if
placed too close to the display unit. Ob-
serve the following compass safe distances
to prevent deviation of a magnetic com-
pass: Standard compass, 1.0 m, Steering
compass, 0.8 m.
DISPLAY UNIT
Tabletop Mounting
1. Unfasten the two bolts at the front of the
2. Using the mounting base as a template
3. Fasten the mounting base to the tabletop
4. Set the display unit to the mounting base
Mounting base
6
display unit to dismount the mounting
base.
mark fixing holes in the mounting loca-
tion.
with M10 bolts or coach screws.
and fasten it with the bolts removed at step
1.
DISPLAY
M8 x 40 hex bolt
Cap
Figure 17 Tabletop mounting of
display unit
UNIT
M10 bolts
or coach
screws
120
160
100
Hide quick links:
Advertisement
Table of Contents
