All wiring are terminated at the rear of the display unit. Connect the scanner unit, power supply
and external equipment, referring to the drawing below for connector location. Be sure to ground
the display unit.
Use the power cable supplied with the
radar.
DJ connector
(Scanner)
Gyrocompass
connector
NMEA I/O connector
(Navigator, see below)
NMEA connector
(Video Sounder,
see below)
(RSD, TLL)
Navigator
(L/L, WP...)
(Plotter)
Video
Sounder
Depth, water
temperature
WIRING
CAUTION
Ground the equipment to
prevent electrical shock and
mutual interference.
External equipment connector
(Slave display, Remote display)
Earth terminal
INT Board
Figure 19 Display unit, rear view
Power
Power fuse F1351*
connector
10A: 24/32 VDC
15A: 12 VDC
SPU Board
* The display unit is shipped
for connection to a 12 V
ship's mains, and a 15A fuse
is inserted in the fuse holder.
For 24/32 V ship's mains, re-
place the 15A fuse with the
10A fuse (supplied).
8