Program Values - Bosch GWH 2400 ES NG Manual

Maintenance and service
6.5

Program values

This section describes details on programming the
appliance. For most applications the factory default
values will robust and stable operation. Only adjust the
factory settings if the installation requires changes as
indicated in the appropriate section of this manual.
Program Description
P1 Maximum Power
P2 Minimum Power
P3 Remote Con-
trols installed
P4 Access to Diag-
nostic Mode
P6 Temperature
Unit
Table 17 Program values, factory default settings and ranges.
34
Factory Default MIN
NG:40, LP:37 21
6 6
_0 _0
E 0d
°F °F
Refer to chapter 6.6 Control board diagnostics (page
35) regarding how to access these P-modes.
Caution: Misadjusted
values can
malfunction, errors, and service
calls.
MAX Comment
NG:41, LP:37 see chapter 3.12, page 24.
note: reducing P1 values below
maximum will reduce maximum
power of the appliance.
20 see chapter 6.7, page 36
6 see chapter 5.5, page 29
10f see chapter 6.6, page 35
°C
program
lead to appliance
6 720 608 782