Mirror Image - Husqvarna Lily 555 User Manual

Mirror images
Mirror image side to side
In NORM and PROG only the stitch
selected is mirrored. The entire
program is mirrored in REP. You
can also mirror the width when you
wish to change the straight stitch
needle position, e.g. from left to
right.
When mirror image side to side
is selected the symbol
shown on the Infodisplay.
555
Programming STOP
The STOP button is used to conclu-
de a stitch program, i.e. the machine
fastens the thread and stops auto-
matically when the sewing of your
stitch or letter combination is com-
pleted. The symbol
the very right.
You can continue your program-
ming even after having pressed
STOP. In REP position the
displayed. Then, when sewing, the
machine stops automatically and
fastens the thread in every position
where you have programmed STOP
and at the end of the stitch combina-
tion.
Instruction book Lily 555/545
.
will be
545
is displayed to
is
Mirror image end to end
In NORM and PROG only the stitch
selected is mirrored. The entire
program is mirrored in REP. When
mirror image end to end is selected
the symbol will be shown on the
Infodisplay.
555
If you have programmed STOP at
the end of your program and then
mirror the entire program in length,
the STOP will be placed at the
beginning. Use the button
advance to the next stitch to avoid
STOP.
Just press the foot control again and
the machine will sew the rest of
what you have programmed.
If you wish to repeat your stitch
combination without having the
machine stop, press the STOP but-
ton to cancel the STOP in REP po-
sition.The symbol
from the Infodisplay.
(If you should forget to enter STOP
while in PROG it is also possible
to use the STOP button in REP
position. The STOP will remain
until you select another function or
stitch.)
If you have programmed STOP at
the end of your program and then
mirror the entire program in length,
the STOP will be placed at the
beginning. Use the button
advance to the next stitch to avoid
STOP.
.
545
and
will disappear
and
25