Threading Lower Thread; Placing The Bobbin In The Machine - Husqvarna Lily 555 User Manual

Placing the bobbin in the machine

1. Open the cover by slightly pulling
it towards you and take it away.
3. Hold the bobbin and draw the
thread to the right passing (a).
Instruction book Lily 555/545
a
2. Place the bobbin in the bobbin
case with the mark
ward and the thread to the left of
the bobbin. The bobbin will then
rotate counter-clockwise while
drawing out the thread.
b
c
4. Hold the thread tight and draw it
to the left so that the thread falls
correctly into the tension spring.
Continue threading around (b)
and to the right of the thread
knife (c).
Replace the cover and slide it into
position. Then pull the thread to
the left to cut it.
facing up-
13