Threading for twin needle
1. Insert a twin needle.
2. Wind a bobbin with the thread
you are going to use as the se-
cond upper thread
3. Thread the machine as descri-
bed and check to ensure that the
thread lies between the inner
thread tension discs, inside the
lowest thread guide. Thread left
needle.
4. Attach the extra spool pin onto
the machine. Place a spool holder
under the thread.
5. Place the bobbin with the second
thread on the spool pin.
6. Thread the machine as before but
this thread should lie between the
outer thread tension discs, outside
the lowest thread guide. Thread
right needle.
Instruction book Lily 555/545
11