Topcom Babytalker 1010 User Manual page 13

21.2 Receiving a Signal
21.3 Transmitting a Signal
To check the channel activity use the monitor function (See chapter
21.6). Release and press the
21.4 VOX Selection
The PMR is capable of voice activated (VOX) transmission. In VOX mode, the radio will
transmit a signal when it is activated by your voice or other sound around you. VOX operation
is not recommended If you plan to use your radio in a noisy or windy environment.
21.5 Call Tones
A call tone alerts others that you want to talk.
Press the button
channel.
TOPCOM Babytalker 1010
The Parent Unit is continuously in RECEIVE mode when the unit is
switched ON and not transmitting. When a signal is detected the RX
icon will be displayed.
• Press and hold the
symbol is displayed.
• Hold the unit in a vertical position with the MICROPHONE 10cm
from the mouth and speak into the microphone.
• Release the
PTT
• Press the - button
flashes on the display and the VOX icon is displayed.
• Press the - button
19
button again to select the VOX sensitivity level which
displayed. Press the
display, to turn VOX OFF.
• Press the - button
PTT
mode.
14
briefly. The call tone will be transmitted for 3 seconds on the set
20
- button to TRANSMIT. The TX
PTT
20
- button when you want to stop transmitting.
20
- button to restart transmitting.
PTT
15
3 times, the current VOX setting
19
to turn the VOX feature ON press
18
- button
20
to confirm and return to stand-by
TOPCOM Babytalker 1010
until OF appears on the
-
13