Topcom Babytalker 1010 User Manual page 12

TOPCOM Babytalker 1010
19 Automatic monitor ON/OFF
The Baby Unit can automatically open the microphone every 5 minutes and transmit the
room activity for 5 seconds.
20 Alert Tone ON/OFF
The Baby Unit will send out an alert tone when you activate the VOX function. After the alert
tone, it will transmit the detected voice signal.
21 Using the Parent unit as a PMR
Besided using the Parent unit as receiver for the Baby unit transmission, you can use it to
communicate with other PMR (Private Mobile Radio) users which are on the same channel.
21.1 Changing Channels
To use the Parent Unit as a standard PMR, the Channel Memory
function must be disactivated (See chapter 15.2) and the unit must
be set to the same channel as your correspondent PMR.
12
• Press the - button
• Press the - button
to disable (OF) this function.
• Press the - button
• Press the - button
• Press the - button
to disable (OF) this function.
• Press the - button
• Press the - button
flashes on the display.
• Press the - button
channel.
• Press the - button
PTT
mode.
6
4 times.
8 to enable (ON) or the
6
to confirm the selection.
6
5 times.
8 to enable (ON) or the
6
to confirm the selection.
15
once , the current channel number
19
or the - button
20
to confirm and return to stand-by
4
- button
4
- button
18
to change the
TOPCOM Babytalker 1010