Beep Tone On/Off - Topcom Babytalker 1010 User Manual

15.2 Parent unit
16 Adjusting the Baby Unit VOX sensitivity
The baby unit transmission is activated by the voice of the baby or by another sound in the
environment (VOX).
The VOX sensitivity can be adjusted by turning the VOX sensitivity switch
– Up = Highest sensitivity position
– Down = Lowest sensitivity position
Try the VOX sensitivity and excercise sufficiently before using
the Babytalker 1010.
17 Adjusting the Parent Unit Speaker Volume

18 Beep tone ON/OFF

The Baby Unit can transmit automatically a 1 khz beep tone every 30 seconds when it is in
the listening mode. This function can be used when you need to be sure that the babytalker
is operational at all time.
TOPCOM Babytalker 1010
• Press the - button
flashes on the display.
• Press the - button
channel memory.
To disactivate the Channel Memory function, select OF
• Press the PTT - button
mode.
• Press the - button
speaker volume. The volume level is displayed.
• Press the - button
• Press the - button
• Press the - button
to disable (OF) this function.
• Press the - button
15
twice, the current channel memory
19
or the - button
20
to confirm and return to stand-by
19
in stand-by-mode to increase the
18
to decrease the speaker volume.
6
3 times.
8
to enable (ON) or the
6
to confirm the selection.
TOPCOM Babytalker 1010
18
to change the
1
;
4
- button
11