Mic Lock - Kenwood TM-271 Instruction Manual

1
DTMF tones are not transmitted in TX Mode if the
DTMF Lock function is ON.
2
When transmitting a stored DTMF number, press Mic
[PTT]+Mic [PF/D], release Mic [PF/D], then press a
Memory Channel number from 0 to 9. To transmit the
"D" tone, press Mic [PF/D] again.
3
On the display,
4
On the display, is represented by "F".
Note: When storing a Memory Name or Power-on message, the
DTMF keys can be used. Each time a key is pressed, the displayed
character will change, according to the table below.
K y e
1 Q
2 A
3 D
4 G
5 J
6 M
7 P
8 T
9 W
12
0 s [ p a c ] e
64
is represented by "E".
D s i l p y a d e h C r a c a e t s r
Z 1
B C
E F
H I
K L
N O
R S
U V
X Y
0 —

MIC LOCK

The Mic Lock function disables the Mic PF keys to
prevent you from accidentally changing the transceiver
operation.
1 Press [F], [MENU] and turn the Tuning control to
select Menu No. 34 (MC.L).
2 Press [MENU] and turn the Tuning control to select
"ON" or "OFF" (default).
3 Press [MENU] to store the setting or any other key to
cancel.
2
4 Press any key other than [MENU] to exit Menu Mode.
3
Note: The Mic Lock function will not lock the DTMF keys.
4
5
6
7
8
9
/