Table of Contents
Advertisement
Drive System
Maintenance
Checking the Tire Pressure
Service Interval: Every 25 hours—Check tire pressure.
Maintain the air pressure in the front and rear tires as
specified. Uneven tire pressure can cause uneven cut. Check
the pressure at the valve stem
when they are cold to get the most accurate pressure reading.
Refer to the maximum pressure suggested by the tire
manufacturer on the sidewall of the caster wheel tires.
Inflate the rear drive wheel tires to 89.6 kPa (13 psi).
Figure 43
1. Valve stem
Releasing the Electric Brake
The electric brake releases by manually rotating the link arms
forward. Once the electric brake is energized the brake will
reset.
To release the brake:
Figure 44
1. Brake link arm on the electric brake control module
2. Left rear tire
1. Turn the ignition key to the Off position or disconnect
the battery.
(Figure
43). Check the tires
2. Locate the shaft on the electric brake where the
brake-link arms are connected.
3. Rotate the shaft forward to release the brake.
35
Hide quick links:
Advertisement
Table of Contents
