Call Settings; About Call Settings; The Call Settings - TANDBERG 150 MXP Administrator's Manual

Call Settings

About Call Settings

Call Settings allow you to define a maximum
call length, a maximum upstream rate and
your default call settings, which will apply un-
less you specifically change the settings for a
particular call.
Maximum Call Length. If your call exceeds
the maximum Call Length, as specified here,
the call will disconnect automatically. Range is
0–999 minutes. 0 means disabled feature.
Max. Upstream Rate. Lets you define a
preferred maximum transmitted call rate in kbps.
This is to be able to limit the outgoing bandwidth
whilst keeping the maximum incoming bandwidth,
especially useful for home offices with different
upstream and downstream rates, typically ADSL.
Note that maximum upstream rate for the system
is 512 kbps.
Default Call Settings.
You may define a
default call settings, which will apply unless
you specifically change the settings for a
particular call.
See General Settings – an overview for a
description.
Table of Trademarks & Patents &
Contents Copyright Disclaimers
D 14127.01
01.2008
About
Safety/ To Get You
Administrator
Environmental Up and Going
Settings

The Call Settings

General General Audio
Settings Settings Settings
29
TANDBERG 150
ADMINISTRATOR'S GUIDE
ADMINISTRATOR'S GUIDE
Call Type. Can be set to Video Call or
Telephone Call. If Call Type is set to
Telephone Call or the
Call
icon is selected when making a call,
the call will be set up as a telephone call.
In all other cases the call will be set up
as a video call.
Network H.323
. Options are
a gatekeeper is present, it is possible
to place IP-calls using "telephone-style"
numbers, e.g. an E.164 alias, according
to the numbering plan implemented in
the gatekeeper. The gatekeeper will then
translate the dialed number into an IP-
address, see H.323 Settings
gatekeepers.
H.323
Select to ensure that the call is
set up as an H.323 call.
Select SIP to ensure that the call is set
up as a SIP call.
Bandwidth.
Determines the quality of
the video picture. When set to
system will establish a connection using
a proper bandwidth for the call, typically
384 kbps for IP calls.
Max
When set to the system will set up
the call with maximum bandwidth depend-
ing on the selected network.
Security Network
Profiles &
Settings Settings
Wizard
MXP
TANDBERG 150MXP
Place Telephone
SIP
and . If
for more on
Auto the
Diagnostics
Reset &
Upgrade