Placing The Monitor With The Stand - Bose VideoWave III Setup Manual

Physical Setup
Here is what you need from Box 1:
1
1
Monitor AC power cord
Anti-tip straps
* The supplied monitor cable is not rated for in-wall use. In-wall monitor
cables are available from Bose or a Bose authorized dealer.
You also need the stand, screws, and wrench:
Hex wrench Stand screws (2)
Monitor stand
8 - English
Monitor cable*
Anti-tip strap screws (4)

Placing the monitor with the stand

Before you place the monitor, attach the stand.
1. Unpack the stand, stand screws, and monitor.
2. Lower the monitor onto the stand, carefully lining up the
holes in the bottom of the monitor with the supports on
the stand.
WARNING: The 46 in. monitor weighs 120 lbs. (54 kg). The
55 in. monitor weighs 135 lbs. (61 kg). To prevent personal injury,
a two-person lift is required.
Monitor
support
Monitor
support