Bose VideoWave III Setup Manual page 15

2. Plug the free end of the monitor cable into the
A/V OUT to Monitor connector on the rear panel of the
control console.
A/V OUT to Monitor
connector
3. Plug the power supply output cord into the Power connec-
tor on the control console.
Power
connector
Power supply output cord
Monitor cable
AC power cord
Power supply
4. Plug the AC power cord into the power supply. Fully insert
the plug in as far as it can go.
5.
Plug the other end of the power cord into a live AC (mains)
power outlet.
6. To begin the interactive setup phase, go to "Starting the
system" on page 16 and follow the instructions.
Physical Setup
English - 15