Bose VideoWave III Setup Manual page 17

To start the VideoWave III entertainment system:
®
1. Press the Power button
console. The control console system status indicator
displays the startup status.
Control console
system status
indicator
Control console system
status indicator
Off
Blinking green
Solid green
Orange
Note: When the system starts up, the monitor emits a start-up
tone and displays the Bose logo with a progress bar.
on the front of the control
Status
The system is not connected
to power, or operating in power
saving mode.
Starting up.
On and ready to use.
Shutting down, or off and charg-
ing iPod or iPhone dock (dock
available for purchase from
Bose).
2. Slide the battery compartment cover off the back of the
remote control.
3.
Install the batteries (included), matching the polarity
markings (+ and –) to the markings inside the battery
compartment.
AAA (IEC LR3)
batteries (2)
4.
Slide the battery cover back into place.
Interactive Setup
Battery compartment
cover
English - 17