Bose VideoWave III Setup Manual page 13

2. Attach the monitor cable and AC power cord to the monitor
as shown.
You do not need to re-attach the connector cover. Hiding
the cables behind the monitor may be easier with the
cover removed.
Monitor
cable
AC power
cord
3. Attach the wall mounting brackets (not included) to the wall
and monitor according to the instructions included with the
wall brackets.
4. Lift the monitor out of its packing material.
WARNING: The 46 in. monitor weighs 120 lbs. (54 kg). The
55 in. monitor weighs 135 lbs. (61 kg). To prevent personal injury,
a two-person lift is required.
5. Attach the monitor to the wall according to the instructions
included with the wall brackets.
Note: If using an AC (mains) outlet that is on the wall behind
the monitor, plug in the power cord before hanging
the monitor.
Physical Setup
English - 13