Messages - Bernina Artista 165 User Manual

Messages

The following messages may appear on the screen of
the artista sewing computer during certain operations.
They are reminders, warnings, or confirmations about
the features and functions being selected. Below is a list
MESSAGE
Lower presser foot.
Raise presser foot.
Drop the feed dog.
Free arm system:
Do not connect hoop until processing is completed and
check button (layout 1) is pushed.
Needle must be in the highest position.
Use a larger embroidery hoop.
The pattern cannot be completed in this size.
Please reduce your pattern size.
This embroidery module version is not compatible
with the machine.
Check the version in the setup program.
Warning: This motif has not yet been saved.
With this selected function, the motif will be lost.
The memory is too small to combine the selected
motifs.
The memory capacity is too small for this
combination. One of the last motifs edited
will not be saved.
Your embroidery motif is finished.
008904.55.04_EMB_0401_a165 a170 a180_EN
of the messages pertaining to the embroidery module
(see the sewing computer instruction manual for
messages that pertain to the sewing computer) and the
appropriate responses.
RESPONSE
· touch "esc" to return to the previous screen.
· lower the presser foot and begin to sew.
· when the check function is selected, the presser foot
must be raised.
· raise the foot and touch "esc" to return to the
previous screen.
· the feed dog must be in the down position for
embroidery.
· this message shows as a reminder when you first
select a pattern each time the sewing computer is
turned on.
· touch "esc" to return to the previous screen.
Appears as a reminder to wait until the selected stitch
is processed before attaching the hoop if working with
the free arm adapter.
· appears if the needle is not in the highest position
when the sewing computer is "reading" the size of
the hoop attached to the sewing computer.
· raise the needle using the handwheel and touch
"esc" to return to the previous screen.
· the size of motif and the size of the hoop are
incompatible.
· change hoops or reduce the motif size.
· touch "esc" to return to the previous screen.
· the pattern has exceeded the maximum size for
sewing.
· touch "esc" to return to the previous screen.
· reduce the size and continue the embroidering
process.
· the sewing computer and the embroidery module
must have the same version of software indicated in
the setup program to stitch properly.
· see setup program in the artista sewing computer
instruction manual.
· appears when attempting to quit the editing process
of combining patterns without placing the last motif
on temporary hold.
· select "yes" or "no" as desired; will return to the
previous screen.
· too many designs have been selected to combine as a
new design.
· touch "esc" to return to the previous screen.
· delete one or more of the motifs and continue the
editing process.
The memory capacity is too small to save this
combination of patterns. The last of the motifs edited
will not be saved.
· design is completed; remove the hoop from the
embroidery module.
· touch "esc" to return to the previous screen.
Messages 15