Table of Contents
Advertisement
Alphabet program functions
One of the following functions will appear in the lower
left corner of the screen when a letter of an alphabet or
monogram is selected. It will reduce the number of
Letter size
· appears in toolbar when any letter
or character of one of four
styles of alphabets is selected
· touch one or more times
· one half of field is highlighted
· the gray section visually indicates
the letter size: large (9 mm) or
small (6 mm)
Applications:
· size selection
· works in memory (letters do not
have to be reprogrammed but can
be resized using the edit function)
Messages
The following messages may appear on the screen of the
artista sewing machine during certain operations.
They are reminders, warnings, or confirmations about
the function or stitch being selected. Below is a list
MESSAGE
Please check the lower thread.
Please check the upper thread.
The bobbin winder is on.
Do you really want to delete the
contents of this memory?
Personal Program memory ist full.
Memory is full.
This function will not appear in
the personal program.
normal functions shown on the toolbar by one, causing it
to be hidden.
of the messages pertaining to the sewing machine (see
embroidery manual for messages that pertain to the
embroidery module) and the appropriate responses.
RESPONSE
Check to see if the bobbin thread has run out. Wind and insert a new bobbin
if needed. Machine will not sew until this is corrected.
Check to see if the needle thread has run out or has broken. Rethread the
needle thread if needed. Machine will not sew until this is corrected.
Check to see if bobbin winder is on. If the bobbin winder is on, the foot
pedal is inactive and the machine will not sew. Disengage the winder if
needed. Machine will not sew until this is corrected.
Note: This message will appear when winding a bobbin; touch esc to clear it
from the screen.
Confirms the delete command before any stitches or functions are erased
from memory. Touch OK to continue with the deletion process; touch esc to
abort the process.
To save a stitch, an already saved stitch must be deleted.
To save a stitch, an already saved stitch must be deleted.
Directional stitches and motifs (4, 16 direction and alphabets) cannot be
stored in the Personal Program. Select another stitch from any other menu.
Functions/Messages
Monogram size
· appears in toolbar when any letter
of the monogram alphabet is
selected
· touch once or twice to select
· the number selected will be
highlighted
· monogram sizes are 1 = 30 , 2 = 20 ,
3 = 15 mm
Application:
· size selection
29
Advertisement
Table of Contents
