Horizontal and Vertical Unit Installations
Rubber Feet and the Orientation of Unit Installations
Document 800-07766V1 Rev A
02/11
The Rapid Eye Multi-Media LT unit can be installed one of the two following orientations
(see
Figure
C-1):
•
Horizontal. The rubber feet come pre-installed on the unit for horizontal installations.
•
Vertical. If a vertical installation is required, see
on page
Installation
66
your Multi-Media LT DVR.
Figure C-1
Rubber Feet Placement for Vertical and Horizontal Installations
Keep the rubber feet installed on the bottom of the unit
if you are using a horizontal installation.
Remove the rubber feet from the unit bottom and screw
the rubber feet into the left side of the unit if you are
using a vertical installation.
Rapid Eye Multi-Media LT
installed horizontally
Installing Rubber Feet for a Vertical
for the procedure to change the rubber feet placements on
Rapid Eye
Multi-Media LT
installed vertically
C
65