Netpit And Pit Devices; Figure 5-6 Serial Ports For Pos; Figure 5-7 Cash Registers Connected To A Honeywell Pit - Honeywell Rapid Eye LT Installation Manual

Serial Ports
1 and 2

NetPIT and PIT Devices

OT
TOR
1 2 3 4 5
VIDEO
INPUTS
TELCO
SERIAL PORT 2
SERIAL PORT 1 VGA
USB
Document 800-07766V1 Rev A
02/11
Figure 5-6 Serial Ports For POS
SPOT
MONITOR
1 2 3 4
VIDEO
INPUTS
SERIAL PORT 2
SERIAL PORT 1 VGA
To connect a Multi-Media LT DVR to a point-of-sale (POS) device—a cash register,
automatic teller machine (ATM), and so on—a device is needed for Protocol Interface
Translation (PIT) or Network Protocol Interface Translation (NetPIT). Rapid Eye Multi-Media
LT DVRs support PITs and a NetPIT, for attaching many serial devices to a DVR.
A PIT can provide communications for one device (AVBPIT1) or up to four devices
(AVBPIT4POS). A NetPIT device provides communications for up to 16 POS devices from
one serial port.
Figure 5-7 Cash Registers Connected to a Honeywell PIT
COMMON
CONTROL
SYS FAIL
OUTPUTS
SYS GOOD
1 G 2 G 3 G 4 G
FAULT
RELAY
6 7 8 28V, 3A
MAX
1 G 2 G 3 G 4 G 5 G 6 G 7 G 8
ALARM INPUTS
LAN
IN
OUT
115-230V~
50/60 Hz
NOT
5-3A
USED
USB
PIT and NetPIT devices are connected to the serial ports on the back of Multi-Media LT
DVRs. Your installer configures the PIT/NetPIT device for use with the make and model of
POS device. NetPIT supports applications by Retalix® (RetPIT), Micros® (MicPIT) and
AtmPIT.
Port Restrictions
Only one NetPIT device can be supported; only one can be assigned to a Multi-Media LT
port. Up to 16 POS devices can be assigned to a NetPIT device.
Note A PIT device cannot be assigned to a NetPIT port.
Rapid Eye™ LT DVR Installation Guide
5 6 7 8
TELCO
LAN
IN
OUT
115-230V~
50/60 Hz
NOT
5-3A
USED
USB USB
PIT/NetPIT
SERIAL
PORT 3
SERIAL
PORT 4
G
ON/OFF
POWER
COMMON
CONTROL
SYS FAIL
OUTPUTS SERIAL
SYS GOOD
1 G 2 G 3 G 4 G
PORT 3
FAULT
RELAY
28V, 3A
MAX
SERIAL
PORT 4
1 G 2 G 3 G 4 G 5 G 6 G 7 G 8 G
ALARM INPUTS
ON/OFF
POWER
Up to 16 POS devices
per serial port
Serial Ports
3 and 4
59