Clock Setting; Non-Touch-Screen Radios - Dodge Dakota 2009 Quick Reference Manual

clock seTTing

NON-TOUCH-SCREEN RADiOS

• Press and hold the TIME button until the hours blink; turn the TUNE/
SCROLL control knob to set the hours.
• Press the TUNE/SCROLL control knob until the minutes begin to blink;
turn the TUNE/SCROLL control knob to set the minutes.
• Press the TUNE/SCROLL control knob to save the time change.
TOUCH-SCREEN RADiOS
• Turn the radio ON.
• Touch the screen where the time is displayed.
• Touch the screen where "User Clock" is displayed (Navigation
Radio Only).
• To adjust the hours, touch either the hour forward button or the hour
backward button.
• To adjust the minutes, touch either the minute forward button or the
minute backward button.
• To save the new time setting, touch the screen where the word "Save"
is displayed.
sPare tire reMoval
• The scissor jack and tire changing tools on Extended Cab models are
located behind a panel on the outboard side of the right rear passenger
seat. On Crew
are located below the right rear seat.
• Remove the jack from the stowage compartment.
• Assemble jacking tools.
• Locate the tire carrier access hole on the rear bumper.
• Place assembled jack tool extension rod into the access hole in the
direction of the arrow on the bumper trim.
• Rotate the tool counterclockwise to release and lower the spare tire to
the ground so that it can be pulled out from under the vehicle.
• Refer to Owner's Manual for proper jacking and tire change procedures.
Cab models, the scissor jack and tire changing tools
®