Clock Setting; Non-Touch-Screen Radios - Dodge DURANO 2009 Quick Reference Manual

clock sEtting

NON-TOUCH-sCREEN RADiOs

• Press and hold the TIME button until the hours blink; turn the
TUNE/sCROLL control knob to set the hours.
• Press the TUNE/SCROLL control knob until the minutes begin to blink;
turn the TUNE/sCROLL control knob to set the minutes.
• Press the TUNE/SCROLL control knob to save the time change.
TOUCH-sCREEN RADiOs
• Turn the radio ON.
• Touch the screen where the time is displayed.
• Touch the screen where "User Clock" is displayed (Navigation
Radio Only).
• To adjust the hours, touch either the hour forward button or the hour
backward button.
• To adjust the minutes, touch either the minute forward button or the
minute backward button.
• To save the new time setting, touch the screen where the word "Save"
is displayed.
Driver PoWer seat aDjustMent
• The recline switch, located on the outboard side of the seat,
controls seatback adjustment.
• The seat switch controls forward/back, up/down, and tilt adjustment.
Driver MeMory seat
• The memory seat feature allows you to save two different driver
seating positions. The memory seat switches are located on the
driver's door panel. With the key in the ON/RUN position,
push , then 1 or 2 within five seconds.
• Push 1 or 2 to recall the saved positions.
• Key fobs may be programmed to automatically recall position
1 or 2 when UNLOCK is pushed.
• Refer to Owner's Manual for further details.